Fulltext results:
- Glossary
- sembly of the Linear Shaft Motor. It is typically available in one of five configurations: D, two sets Of win... are many different makes and models of amplifiers available, but they tend to fall into one of three possible... etermine the move profiles. In addition, some are available where the command can be input to the drive throu... \\ **Working** **Envelope** \\ The effective area available for the system to operate, without interfering wi
- GD - Green Drive Standard @green_drive_motors
- c data sheet (EDS).\\ The Green Drive Standard is available in 9 different sizes that can reach up to 1160 N of peak force. All models are available with different strokes and feedback options. The available winding types are for 230/480 VAC or for low volt
- L/LK Ironcore linear motors @ironcore_motors
- es and up to 5 different primary part lengths are available to provide continuous forces from 150 N to 7500 N... . To increase the nominal force, the LK series is available with integrated cooling option. The L1S model type is available to reduce at a minimum the frame size of the moto
- LM Linear Stage @lm_linear_axes
- For the integrated encoder different options are available: SIN/COS 1Vpp, Digital ABZ, Absolute Hiperface, A... bellows PEI for high-speed applications are also available. Flying connectors are used, otherwise the connectors are mounted on the carriage.\\ The axes are available with power and signal cables ready to be used wit
- Formatting Syntax @wiki
- nal [[doku>syntax_highlighting|advanced options]] available for syntax highlighting, such as highlighting lin... x as above, you might want to make the shown code available for download as well. You can do this by specifyi... scription pages. The following syntax plugins are available in this particular DokuWiki installation: ~~INFO
- IP69K ISO Version @green_drive_iso
- eplacement of pneumatic actuators. The motors are available in 6 different sizes with two different flange dimensions: from 45x45mm up to 70x70mm. The available windings are both for high voltage (230/480 VAC)
- GDi - Green Drive ISO 15552 @green_drive_iso
- eplacement of pneumatic actuators. The motors are available in 6 different sizes with two different flange dimensions: from 45x45mm up to 70x70mm. The available windings are both for high voltage (230/480 VAC)
- EtherCAT to MODBUS RTU Gateway @gtw_ethercat
- memory of NLi integrated motor, an SDO mapping is available on the Bus Converter. This communication type is available when the Bus Converter Mode is set to 1 ⇒ EtherCA
- NiLAB EtherCAT Bus Interface @gtw_ethercat
- and 3 outputs as a remote EtherCAT I/O are always available. ===== EtherCAT to CanOPEN DS402 gateway ===== ... ositioning), 7 or 8 (intepolated positioning) are available. ===== EtherCAT to CanOPEN gateway ===== In thi
- Accessories @integrated_drive_motors
- for horizontal applications. The front flange is available with different holes for fixing the payload. {{:... motor remains in steady state. 6 force sizes are available : 12, 17, 22, 40, 50 and 60 N, respectively MagLi
- Motor cooling @ironcore_motors
- ce (IC40). Water cooled versions (ICW37) are also available if necessary. ===== Water cooling ===== When us... nt thermal sensor combined with thermal-switch is available too. ===== Setup elevation and ambient condition
- MBD 230/400 Servo Drive @mbd_servo_drive
- cost and high power Servo Drives. Five sizes are available, ranging from 3A to 42A continuous operation. The... d position control * Brushless linear motors **Available motor feedback:** * Encoder with Hall (standar
- MBM AC Brushless Servomotors @mbm_motors
- CNC machines. The MBM brushless servo motors are available with their plug&play cables which are ready to be... IP65 protection\\ – Fan and water cooling options available\\ – Different connection types: M17, M23, cablegl
- Accessories @miniature_motors
- for horizontal applications. The front flange is available with different holes for fixing the payload. {{:... motor remains in steady state. 6 force sizes are available : 12, 17, 22, 40, 50 and 60 N, respectively MagLi
- NiLAB Starter Software @nilab_starter
- user configurable application-based GUIs are also available with this interface. This software can be downlo... of wrong slave id on the interface in respect to available motors on the modbus \\ - Added safety warning at