User Tools

Site Tools


Fault and Warning Messages

Any error message is displayed on the servo amplifier display. All error messages result in the opening of the OK relay contact (C5/11-12) and in the switching off of the servo amplifier final stage (motor torque). At the same time the motor-holding brake will be actived.
While the R type alarms are resettable by the user, the B type alarms are blockers. In the latter case, to reset the alarm, it must power off and on again the servo amplifier (24V auxiliary power and main power).


mbd_servo_drive/fault_messages.txt · Last modified: 2023/09/21 07:16 by

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki