Action unknown: siteexport_addpage
meta data for this page
Carriage Mounting / Dismounting procedure
In order to replace the linear guiding blocks or a damaged magnets, please proceed as following:
Step 1 - Remove the standard M5 linear guiding blocks screws from the carriages
Step 2 - Mounting M5x50 screws instead of the M5 standard screws
Step 3 - Remove the linear guiding blocks screws
Step 4 - Screw the M8 screws to lift the carriage
Step 5 - Insert a wood block between the primary part and the magnet and remove the M5
