Fulltext results:
- CANopen PDO Example @en:mbd_servo_drive
- ====== CANopen PDO Example ====== The mode of operation is mapped at index 0x6060 subindex 0 with size of 1 ... 0x23 |0x00|0x1A|0x03|0x08|0x00|0x61|0x60|Mode of operation display| ==== Configuration of PDO from Master t... 0x23 |0x00|0x16|0x03|0x08|0x00|0x60|0x60|Mode of operation| ===== How to program using SDO write - Torque c... 0x23 |0x00|0x1A|0x03|0x08|0x00|0x61|0x60|Mode of operation display| ==== Configuration of PDO from Master t
- Protection @en
- y mains. Leakage current exceeds 3.5 mA in normal operation. \\ * Use a copper conductor with at least 10 mm²... r wrong wiring of cable connections | | incorrect operation of the equipment components | | wrong input of parameters before operation | | malfunction of sensors, encoders and monitori... even after an unspecified period of trouble-free operation. \\ The monitoring in the drive components is nor
- uPLC @en:integrated_drive_motors
- the stack contains the result of the logical AND operation between itself and the y bit of the Pa parameter|... the stack contains the result of the logical AND operation between itself and the y bit of the negated Pa pa... n the stack contains the result of the logical OR operation between itself and the y bit of the Pa parameter|... n the stack contains the result of the logical OR operation between itself and the y bit of the negated Pa pa
- Safety instruction @en
- to the person or persons responsible for the safe operation of this equipment.\\ If the equipment is resold, ... age, assembly and installation as well as care in operation and maintenance are prerequisites for optimal and safe operation of this equipment. | | Only persons who are trained and qualified for the use and operation of the equipment may work on this equipment or wi
- CANopen PDO @en:epulse50_dc_servodrive
- ====== CANopen PDO ====== The mode of operation is mapped at index 0x6060 subindex 0 with size of 1 byte.\\ ... ==== |**BIT Number** |**Description** |**Mode of operation** | |11|STATUSWORD_INTERNAL_LIMIT_ACTIVE| | |12|S... ==== |**BIT Number** |**Description** |**Mode of operation** | |0|CTRLWORD_BIT_SWITCH_ON| | |1|CTRLWORD_BIT_... |2|CTRLWORD_BIT_QUICK_STOP| | |3|CTRLWORD_BIT_EN_OPERATION| | |4|CTRLWORD_HOME_START|Homing| |4|CTRLWORD_ENA
- uPLC-Register @de:integrated_drive_motors
- it 0→Timer1, Bit 1→Timer2 oder Status der letzten Operation: Bit 2→negatives Ergebnis, Bit 3→Null-Ergebnis|int16| |8672|double-word operation erzwingen: Wenn das Gerät eingeschaltet ist, ist ... s auf 1 gesetzt ist, wird die erste mathematische Operation, die vom uPLC ausgeführt wird, mit drei Operanden... ble-word durchgeführt. \\ Nach der Ausführung der Operation wird 8672 automatisch auf 0 gesetzt. Das double-w
- uPLC Functional description @en:integrated_drive_motors
- for the convenience of the user. |**AND logical operation** ||| |bit A|bit B|result| |0|0|0| |0|1|0| |1|0|0| |1|1|1| |**OR logical operation** ||| |bit A|bit B|result| |0|0|0| |0|1|1| |1|0|1... esented by the next word. After every arithmetic operation, bit 2 of 8671 is set to 0 if the result is posit... settings remain active until the next arithmetic operation is executed. A mathematical operation is execute
- uPLC Registers @en:integrated_drive_motors
- ers: bit 0→timer1, bit 1→timer2 or status of last operation: bit 2→negative result, bit 3→zero result|int16| |8672|Force a double word operation: When the unit is powered on, this is 0. If it is set to 1, the first mathematical operation executed by the uPLC is done by using three doubl... word type operands. \\ After the execution of the operation 8672 is automatically set to 0. The double word r
- uPLC @de:integrated_drive_motors
- Stack geladene Bit das Ergebnis der logischen UND-Operation zwischen sich selbst und dem y-Bit des Pa-Paramet... des Stacks enthält das Ergebnis der logischen UND-Operation zwischen sich selbst und dem y-Bit des negierten ... adene Bit enthält das Ergebnis der logischen ODER-Operation zwischen sich selbst und dem y-Bit des Pa-Paramet... dem Stack enthält das Ergebnis der logischen ODER-Operation zwischen sich selbst und dem y-Bit des negierten
- CANopen-PDO-Beispiel @de:mbd_servo_drive
- CTRLWORD_BIT_QUICK_STOP | | |3| CTRLWORD_BIT_EN_OPERATION | | |4| CTRLWORD_HOME_START |Homing| |4| CTRL... ) an den Antrieb sendet, um ihn in den Endzustand Operation Enable zu bringen. Der übliche SERVO-ON-Pfad in d... SWITCH ON dann zu SWITCHED ON und schließlich zu OPERATION ENABLED\\ \\ Zum Beispiel: Sie tun dies über das ... ich Bit 0, Bit 1, Bit 2, Bit 3 alle gesetzt (0x0F OPERATION ENABLED). ==== Deaktivieren des Antriebs ==== S
- Motor components arrangement @en:ironcore_motors
- pg?nolink&600x226|single_1.jpg}} The independent operation of two or more primaries on a secondary is possib... 7|single_2.jpg}} ===== Gantry arrangement ===== Operation with two linear scales and drive controllers (gan... link&700x264|single_4.jpg}} To ensure successful operation, the axis must fulfill the following requirements... d be arranged in succession. To ensure successful operation, the primaries must be arranged in a specific gri
- Installation @en:mbd_servo_drive
- otes ===== \\ The MBD amplifier must be put into operation as an integrated component of a machine or equipm... cal engineering and amplifier technology (for the operation and use).| **Caution:** the misuse of the produc... .\\ Servo amplifiers may have hot surfaces during operation, it is necessary to protect the user from acciden... or disconnecting the main power switch). For this operation place the converter on an external plane from the
- Esempio PDO CANopen @it:mbd_servo_drive
- CTRLWORD_BIT_QUICK_STOP | | |3| CTRLWORD_BIT_EN_OPERATION | | |4| CTRLWORD_HOME_START |Homing| |4| CTRL... o) al drive per farlo cambiare allo stato finale, Operation Enable. Il percorso SERVO-ON comune nella macchin... a READY TO SWITCH ON poi a SWITCHED ON e infine a OPERATION ENABLED\\ \\ Per esempio: Lo fai tramite il contr... bit 0, bit 1, bit 2, bit 3 tutti impostati (0x0F OPERATION ENABLED). ==== Disabilitazione del drive ==== S
- CANopen-PDO @de:epulse50_dc_servodrive
- |2|CTRLWORD_BIT_QUICK_STOP| | |3|CTRLWORD_BIT_EN_OPERATION| | |4|CTRLWORD_HOME_START|Homing| |4|CTRLWORD_ENA... TO SWITCH ON, dann zu SWITCHED ON und schließlich OPERATION ENABLED.\\ \\ Sie tun dies über das control word,... ich alle Bit 0, Bit 1, Bit 2, Bit 3 gesetzt (0x0F OPERATION ENABLED). ===== EDS-Datei (CANopen) ===== EDS-D
- uPLC Funktionale Beschreibung @de:integrated_drive_motors
- word dargestellt wird. Nach jeder arithmetischen Operation wird Bit 2 von 8671 auf 0 gesetzt, wenn das Ergeb... ngen bleiben aktiv, bis die nächste arithmetische Operation ausgeführt wird. Eine mathematische Operation wird ausgeführt, indem das Ergebnis in einen der freien Param